Zolertia Orion Ethernet Router
The Zolertia Orion Ethernet Router allows to create IoT applications out-of-the-box, connecting any IPv4/IPv6 service or application to 6LoWPAN wireless networks.
The Orion Router is a capable IPv4/IPv6 routing device, with an Ethernet interface and dual wireless radio, powered either via micro-USB or Power Over Ethernet (POE). The device integrates the ENC28J60 ethernet module, and an external POE module, supporting up to 48VDC.
In a nutshell the Orion Router packs the following features:
ARM Cortex-M3 with 512KB flash and 32KB RAM (16KB retention), 32MHz.
ISM 2.4-GHz IEEE 802.15.4 & Zigbee compliant.
ISM 868-, 915-, 920-, 950-MHz ISM/SRD Band.
RP-SMA connector for a 2.4GHz external antenna
SMA connector for a 868/915MHz external antenna
RJ45 ethernet connector
Ethernet 10BASE-T IPv4/IP64
AES-128/256, SHA2 Hardware Encryption Engine.
ECC-128/256, RSA Hardware Acceleration Engine for Secure Key Exchange.
On-board CP2104/PIC to flash over its micro-USB connector
User and reset buttons.
Power on/off button and LED to show power state
RGB LED to allow more than 7 colour combinations.
Layout 40.29 x 73.75 mm
There are ready-to-use examples at
examples/zolertia/zoul/orion, showing how to deploy an IP64 border router, and connect to services such as IFTTT (If This Then That).
Orion Technical documentation
Orion Ethernet Router pin-out