Defines related to the CC1350 Sensortag.
More...
|
file | board.h |
| Header file with definitions related to the I/O connections on the TI Sensortag.
|
|
|
Those values are not meant to be modified by the user
|
#define | LEDS_CONF_COUNT 1 |
|
#define | LEDS_CONF_RED 1 |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_LED_1 IOID_10 |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_DP4_UARTRX IOID_28 |
|
#define | BOARD_IOID_DP5_UARTTX IOID_29 |
|
#define | BOARD_IOID_UART_RX IOID_17 |
|
#define | BOARD_IOID_UART_TX IOID_16 |
|
#define | BOARD_IOID_UART_CTS IOID_UNUSED |
|
#define | BOARD_IOID_UART_RTS IOID_UNUSED |
|
#define | BOARD_UART_RX (1 << BOARD_IOID_UART_RX) |
|
#define | BOARD_UART_TX (1 << BOARD_IOID_UART_TX) |
|
#define | BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS) |
|
#define | BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_KEY_LEFT IOID_15 |
|
#define | BOARD_IOID_KEY_RIGHT IOID_4 |
|
#define | BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT) |
|
#define | BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_REED_RELAY IOID_1 |
|
|
Those values are not meant to be modified by the user
|
#define | EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0 |
|
#define | EXT_FLASH_SPI_PIN_SCK IOID_17 |
|
#define | EXT_FLASH_SPI_PIN_MOSI IOID_19 |
|
#define | EXT_FLASH_SPI_PIN_MISO IOID_18 |
|
#define | EXT_FLASH_SPI_PIN_CS IOID_14 |
|
#define | EXT_FLASH_DEVICE_ID 0x14 |
|
#define | EXT_FLASH_MID 0xC2 |
|
#define | EXT_FLASH_PROGRAM_PAGE_SIZE 256 |
|
#define | EXT_FLASH_ERASE_SECTOR_SIZE 4096 |
|
#define | BOARD_IOID_SDA IOID_5 |
| I2C IOID mappings. More...
|
|
#define | BOARD_IOID_SCL IOID_6 |
| Interface 0 SCL: All sensors bar MPU.
|
|
#define | BOARD_IOID_SDA_HP IOID_8 |
| Interface 1 SDA: MPU.
|
|
#define | BOARD_IOID_SCL_HP IOID_9 |
| Interface 1 SCL: MPU.
|
|
#define | BOARD_IOID_MPU_INT IOID_7 |
| MPU IOID mappings. More...
|
|
#define | BOARD_IOID_AUDIOFS_TDO IOID_16 |
| Board devpack IOID mappings (LCD etc.) More...
|
|
#define | BOARD_IOID_TMP_RDY IOID_11 |
| TMP Sensor. More...
|
|
#define | BOARD_IOID_MIC_POWER IOID_13 |
| Digital Microphone. More...
|
|
|
Those values are not meant to be modified by the user
|
#define | RF_CORE_CONF_RADIO_SETUP_FRONT_END_MODE 0x01 /* Single-Ended, RFP */ |
|
#define | RF_CORE_CONF_RADIO_SETUP_BIAS_MODE 0x01 /* External */ |
|
#define | RF_CORE_CONF_PROP_FRONT_END_MODE 0x02 /* Single-Ended, RFN */ |
|
#define | RF_CORE_CONF_PROP_BIAS_MODE 0x01 /* External */ |
|
|
Those values are not meant to be modified by the user
|
#define | IEEE_MODE_CONF_BOARD_OVERRIDES ADI_HALFREG_OVERRIDE(0, 16, 0x7, 1), |
|
#define | RF_BLE_CONF_BOARD_OVERRIDES ADI_HALFREG_OVERRIDE(0, 16, 0x7, 1), |
|
#define | SMARTRF_SETTINGS_CONF_BOARD_OVERRIDES ADI_HALFREG_OVERRIDE(0, 16, 0x7, 2), |
|
#define | SMARTRF_SETTINGS_CONF_RSSI_OFFSET_779_930 0x00F688A3 |
|
#define | SMARTRF_SETTINGS_CONF_OVERRIDE_TRIM_OFFSET 0x00018883 |
|
#define | BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00 |
| Board indices for the button HAL. More...
|
|
#define | CCXXWARE_CONF_BL_PIN_NUMBER IOID_UNUSED |
| ROM bootloader configuration. More...
|
|
|
#define | BOARD_STRING "TI CC1350 SensorTag" |
|
void | board_init (void) |
| Board specific iniatialisation.
|
|
Defines related to the CC1350 Sensortag.
This file provides connectivity information on LEDs, Buttons, UART and other peripherals
This file can be used as the basis to configure other boards using the CC13xx code as their basis.
This file is not meant to be modified by the user.
◆ BOARD_BUTTON_HAL_INDEX_KEY_LEFT
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00 |
Board indices for the button HAL.
Those values are not meant to be modified by the user
Definition at line 246 of file board.h.
◆ BOARD_IOID_AUDIOFS_TDO
#define BOARD_IOID_AUDIOFS_TDO IOID_16 |
Board devpack IOID mappings (LCD etc.)
Those values are not meant to be modified by the user
Definition at line 182 of file board.h.
◆ BOARD_IOID_MIC_POWER
#define BOARD_IOID_MIC_POWER IOID_13 |
Digital Microphone.
Those values are not meant to be modified by the user
Definition at line 209 of file board.h.
◆ BOARD_IOID_MPU_INT
#define BOARD_IOID_MPU_INT IOID_7 |
MPU IOID mappings.
Those values are not meant to be modified by the user
Definition at line 170 of file board.h.
◆ BOARD_IOID_SDA
#define BOARD_IOID_SDA IOID_5 |
I2C IOID mappings.
Those values are not meant to be modified by the userInterface 0 SDA: All sensors bar MPU
Definition at line 158 of file board.h.
◆ BOARD_IOID_TMP_RDY
#define BOARD_IOID_TMP_RDY IOID_11 |
TMP Sensor.
Those values are not meant to be modified by the user
Definition at line 200 of file board.h.
◆ CCXXWARE_CONF_BL_PIN_NUMBER
#define CCXXWARE_CONF_BL_PIN_NUMBER IOID_UNUSED |
ROM bootloader configuration.
Sensortags do not support the bootloader
Definition at line 257 of file board.h.