Defines related to the SmartRF06 Evaluation Board with a CC1310EM.
More...
|
file | board.h |
| Header file with definitions related to the I/O connections on the TI SmartRF06 Evaluation Board with a CC1310EM.
|
|
|
Those values are not meant to be modified by the user
|
#define | LEDS_CONF_COUNT 4 |
|
#define | LEDS_CONF_RED 1 |
|
#define | LEDS_CONF_YELLOW 2 |
|
#define | LEDS_CONF_GREEN 4 |
|
#define | LEDS_CONF_ORANGE 8 |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_LED_1 IOID_25 |
|
#define | BOARD_IOID_LED_2 IOID_27 |
|
#define | BOARD_IOID_LED_3 IOID_7 |
|
#define | BOARD_IOID_LED_4 IOID_6 |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_UART_RX IOID_2 |
|
#define | BOARD_IOID_UART_TX IOID_3 |
|
#define | BOARD_IOID_UART_CTS IOID_UNUSED |
|
#define | BOARD_IOID_UART_RTS IOID_UNUSED |
|
#define | BOARD_UART_RX (1 << BOARD_IOID_UART_RX) |
|
#define | BOARD_UART_TX (1 << BOARD_IOID_UART_TX) |
|
#define | BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS) |
|
#define | BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_KEY_LEFT IOID_15 |
|
#define | BOARD_IOID_KEY_RIGHT IOID_18 |
|
#define | BOARD_IOID_KEY_UP IOID_19 |
|
#define | BOARD_IOID_KEY_DOWN IOID_12 |
|
#define | BOARD_IOID_KEY_SELECT IOID_11 |
|
#define | BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT) |
|
#define | BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT) |
|
#define | BOARD_KEY_UP (1 << BOARD_IOID_KEY_UP) |
|
#define | BOARD_KEY_DOWN (1 << BOARD_IOID_KEY_DOWN) |
|
#define | BOARD_KEY_SELECT (1 << BOARD_IOID_KEY_SELECT) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_3V3_EN IOID_13 |
|
#define | BOARD_3V3_EN (1 << BOARD_IOID_3V3_EN) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_SPI_SCK IOID_10 |
|
#define | BOARD_IOID_SPI_MOSI IOID_9 |
|
#define | BOARD_IOID_SPI_MISO IOID_8 |
|
#define | BOARD_SPI_SCK (1 << BOARD_IOID_SPI_SCK) |
|
#define | BOARD_SPI_MOSI (1 << BOARD_IOID_SPI_MOSI) |
|
#define | BOARD_SPI_MISO (1 << BOARD_IOID_SPI_MISO) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_LCD_MODE IOID_4 |
|
#define | BOARD_IOID_LCD_RST IOID_5 |
|
#define | BOARD_IOID_LCD_CS IOID_14 |
|
#define | BOARD_IOID_LCD_SCK BOARD_IOID_SPI_SCK |
|
#define | BOARD_IOID_LCD_MOSI BOARD_IOID_SPI_MOSI |
|
#define | BOARD_LCD_MODE (1 << BOARD_IOID_LCD_MODE) |
|
#define | BOARD_LCD_RST (1 << BOARD_IOID_LCD_RST) |
|
#define | BOARD_LCD_CS (1 << BOARD_IOID_LCD_CS) |
|
#define | BOARD_LCD_SCK BOARD_SPI_SCK |
|
#define | BOARD_LCD_MOSI BOARD_SPI_MOSI |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_SDCARD_CS IOID_30 |
|
#define | BOARD_SDCARD_CS (1 << BOARD_IOID_SDCARD_CS) |
|
#define | BOARD_IOID_SDCARD_SCK BOARD_IOID_SPI_SCK |
|
#define | BOARD_SDCARD_SCK BOARD_SPI_SCK |
|
#define | BOARD_IOID_SDCARD_MOSI BOARD_IOID_SPI_MOSI |
|
#define | BOARD_SDCARD_MOSI BOARD_SPI_MOSI |
|
#define | BOARD_IOID_SDCARD_MISO BOARD_IOID_SPI_MISO |
|
#define | BOARD_SDCARD_MISO BOARD_SPI_MISO |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_ALS_PWR IOID_26 |
|
#define | BOARD_IOID_ALS_OUT IOID_23 |
|
#define | BOARD_ALS_PWR (1 << BOARD_IOID_ALS_PWR) |
|
#define | BOARD_ALS_OUT (1 << BOARD_IOID_ALS_OUT) |
|
|
Those values are not meant to be modified by the user
|
#define | BOARD_IOID_ACC_PWR IOID_20 |
|
#define | BOARD_IOID_ACC_INT IOID_28 |
|
#define | BOARD_IOID_ACC_INT1 IOID_28 |
|
#define | BOARD_IOID_ACC_INT2 IOID_29 |
|
#define | BOARD_IOID_ACC_CS IOID_24 |
|
#define | BOARD_ACC_PWR (1 << BOARD_IOID_ACC_PWR) |
|
#define | BOARD_ACC_INT (1 << BOARD_IOID_ACC_INT) |
|
#define | BOARD_ACC_INT1 (1 << BOARD_IOID_ACC_INT1) |
|
#define | BOARD_ACC_INT2 (1 << BOARD_IOID_ACC_INT2) |
|
#define | BOARD_ACC_CS (1 << BOARD_IOID_ACC_CS) |
|
#define | BOARD_IOID_ACC_SCK BOARD_IOID_SPI_SCK |
|
#define | BOARD_ACC_SCK BOARD_SPI_SCK |
|
#define | BOARD_IOID_ACC_MOSI BOARD_IOID_SPI_MOSI |
|
#define | BOARD_ACC_MOSI BOARD_SPI_MOSI |
|
#define | BOARD_IOID_ACC_MISO BOARD_IOID_SPI_MISO |
|
#define | BOARD_ACC_MISO BOARD_SPI_MISO |
|
#define | CCXXWARE_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_SELECT |
| ROM bootloader configuration. More...
|
|
#define | BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00 |
| Board indices for the button HAL. More...
|
|
|
#define | BOARD_STRING "TI SmartRF06EB + CC13xx EM" |
|
Defines related to the SmartRF06 Evaluation Board with a CC1310EM.
This file provides connectivity information on LEDs, Buttons, UART and other peripherals
This file can be used as the basis to configure other boards using the CC13xx/CC26xx code as their basis.
This file is not meant to be modified by the user.
◆ BOARD_BUTTON_HAL_INDEX_KEY_LEFT
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00 |
Board indices for the button HAL.
Those values are not meant to be modified by the user
Definition at line 232 of file board.h.
◆ CCXXWARE_CONF_BL_PIN_NUMBER
#define CCXXWARE_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_SELECT |
ROM bootloader configuration.
Change CCXXWARE_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which button triggers the bootloader on reset. Use CCXXWARE_CONF_BL_LEVEL to control the pin level that enables the bootloader (0: low, 1: high). It is also possible to use any other externally-controlled DIO.
Definition at line 222 of file board.h.