Contiki-NG
pot-sensor.c
1/*
2 * Copyright (c) 2015 NXP B.V.
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of NXP B.V. nor the names of its contributors
14 * may be used to endorse or promote products derived from this software
15 * without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY NXP B.V. AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL NXP B.V. OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 * SUCH DAMAGE.
28 *
29 * This file is part of the Contiki operating system.
30 *
31 * Author: Theo van Daele <theo.van.daele@nxp.com>
32 *
33 */
34#include "contiki.h"
35#include "sys/etimer.h"
36#include "lib/sensors.h"
37#include "pot-sensor.h"
38#include <stdlib.h>
39#include <GenericBoard.h>
40
41/*---------------------------------------------------------------------------*/
42/* LOCAL DEFINITIONS */
43/*---------------------------------------------------------------------------*/
44/* #define DEBUG */
45#ifdef DEBUG
46#include <stdio.h>
47#define PRINTF(...) printf(__VA_ARGS__)
48#else
49#define PRINTF(...)
50#endif
51
52typedef enum {
53 POT_STATUS_NOT_INIT = 0,
54 POT_STATUS_INIT,
55 POT_STATUS_NOT_ACTIVE = POT_STATUS_INIT,
56 POT_STATUS_ACTIVE
57} pot_status_t;
58
59/* Absolute delta in pot level needed to generate event */
60#define DELTA_POT_VALUE 1
61
62/*---------------------------------------------------------------------------*/
63/* LOCAL DATA DEFINITIONS */
64/*---------------------------------------------------------------------------*/
65const struct sensors_sensor pot_sensor;
66volatile static pot_status_t pot_status = POT_STATUS_NOT_INIT;
67static int prev_pot_event_val = 0;
68static int pot_value = 0;
69
70/*---------------------------------------------------------------------------*/
71/* LOCAL FUNCTION PROTOTYPES */
72/*---------------------------------------------------------------------------*/
73PROCESS(POTSampling, "POT");
74
75/*---------------------------------------------------------------------------*/
76/* PUBLIC FUNCTIONS */
77/*---------------------------------------------------------------------------*/
78static int
79configure(int type, int value)
80{
81 if(type == SENSORS_HW_INIT) {
82 pot_status = POT_STATUS_INIT;
83 bPotEnable();
84 process_start(&POTSampling, NULL);
85 return 1;
86 } else if(type == SENSORS_ACTIVE) {
87 if(pot_status != POT_STATUS_NOT_INIT) {
88 if(value) {
89 /* ACTIVATE SENSOR */
90 bPotEnable();
91 prev_pot_event_val = 0;
92 /* Activate POT. */
93 PRINTF("POT ACTIVATED\n");
94 pot_status = POT_STATUS_ACTIVE;
95 process_post(&POTSampling, PROCESS_EVENT_MSG, (void *)&pot_status);
96 } else {
97 /* DE-ACTIVATE SENSOR */
98 bPotDisable();
99 PRINTF("POT DE-ACTIVATED\n");
100 pot_status = POT_STATUS_NOT_ACTIVE;
101 process_post(&POTSampling, PROCESS_EVENT_MSG, (void *)&pot_status);
102 }
103 return 1;
104 } else {
105 /*
106 POT must be intialised before being (de)-activated */
107 PRINTF("ERROR: NO HW_INIT POT\n");
108 return 0;
109 }
110 } else {
111 /* Non valid type */
112 return 0;
113 }
114}
115/*---------------------------------------------------------------------------*/
116static int
117status(int type)
118{
119 if(type == SENSORS_ACTIVE) {
120 return pot_status == POT_STATUS_ACTIVE;
121 } else if(type == SENSORS_READY) {
122 return pot_status != POT_STATUS_NOT_INIT;
123 }
124 return 0;
125}
126/*---------------------------------------------------------------------------*/
127static int
128value(int type)
129{
130 /* type: Not defined for the pot interface */
131 return pot_value;
132}
133/*---------------------------------------------------------------------------*/
134/* LOCAL FUNCTIONS */
135/*---------------------------------------------------------------------------*/
136/* Process to get POT_SENSOR value.
137 POT is sampled. Sampling stopped when POT is de-activated.
138 Event is generated if pot value changed at least the value DELTA_POT_VALUE
139 since last event. */
140PROCESS_THREAD(POTSampling, ev, data)
141{
143 static struct etimer et;
144
145 etimer_set(&et, CLOCK_SECOND / 10);
146 while(1) {
147 PROCESS_WAIT_EVENT_UNTIL((ev == PROCESS_EVENT_TIMER) || (ev == PROCESS_EVENT_MSG));
148 if(ev == PROCESS_EVENT_TIMER) {
149 /* Handle sensor reading. */
150 PRINTF("POT sample\n");
151 pot_value = u16ReadPotValue();
152 PRINTF("POT = %d\n", pot_value);
153 if(abs(pot_value - prev_pot_event_val) > DELTA_POT_VALUE) {
154 prev_pot_event_val = pot_value;
155 sensors_changed(&pot_sensor);
156 }
157 etimer_reset(&et);
158 } else {
159 /* ev == PROCESS_EVENT_MSG */
160 if(*(int *)data == POT_STATUS_NOT_ACTIVE) {
161 /* Stop sampling */
162 etimer_stop(&et);
163 } else if((*(int *)data == POT_STATUS_ACTIVE)) {
164 /* restart sampling */
165 etimer_restart(&et);
166 }
167 }
168 }
169 PROCESS_END();
170}
171
172/*---------------------------------------------------------------------------*/
173/* Sensor defintion for sensor module */
174SENSORS_SENSOR(pot_sensor, POT_SENSOR, value, configure, status);
175/*---------------------------------------------------------------------------*/
176
Event timer header file.
PROCESS_THREAD(cc2538_rf_process, ev, data)
Implementation of the cc2538 RF driver process.
Definition: cc2538-rf.c:1110
#define CLOCK_SECOND
A second, measured in system clock time.
Definition: clock.h:82
void etimer_restart(struct etimer *et)
Restart an event timer from the current point in time.
Definition: etimer.c:199
void etimer_reset(struct etimer *et)
Reset an event timer with the same interval as was previously set.
Definition: etimer.c:192
void etimer_stop(struct etimer *et)
Stop a pending event timer.
Definition: etimer.c:243
void etimer_set(struct etimer *et, clock_time_t interval)
Set an event timer.
Definition: etimer.c:177
#define PROCESS(name, strname)
Declare a process.
Definition: process.h:307
int process_post(struct process *p, process_event_t ev, process_data_t data)
Post an asynchronous event.
Definition: process.c:322
#define PROCESS_BEGIN()
Define the beginning of a process.
Definition: process.h:120
#define PROCESS_WAIT_EVENT_UNTIL(c)
Wait for an event to be posted to the process, with an extra condition.
Definition: process.h:157
#define PROCESS_END()
Define the end of a process.
Definition: process.h:131
void process_start(struct process *p, process_data_t data)
Start a process.
Definition: process.c:99
A timer.
Definition: etimer.h:76