nrf52dk-def.h

Go to the documentation of this file.

/*
 * Copyright (c) 2015, Nordic Semiconductor
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 */
 
/**
 * \addtogroup platform
 * @{
 *
 * \addtogroup nrf52dk nRF52 Development Kit
 * @{
 *
 * \addtogroup nrf52dk-platform-conf Platform configuration
 * @{
 * \file
 *         Platform features configuration.
 * \author
 *         Wojciech Bober <wojciech.bober@nordicsemi.no>
 *
 */
#ifndef NRF52DK_DEF_H_
#define NRF52DK_DEF_H_
 
#include "boards.h"
 
#define PLATFORM_HAS_BATTERY                    0
#define PLATFORM_HAS_RADIO                      0
#define PLATFORM_HAS_TEMPERATURE                1
 
/**
 * \name Leds configurations
 *
 * On nRF52dk all leds are green.
 *
 * @{
 */
#define PLATFORM_HAS_LEDS                       1
#define LEDS_CONF_LEGACY_API                    1
 
#define LEDS_1         (1 << (LED_1 - LED_START)) // 1
#define LEDS_2         (1 << (LED_2 - LED_START)) // 2
#define LEDS_3         (1 << (LED_3 - LED_START)) // 4
#define LEDS_4         (1 << (LED_4 - LED_START)) // 8
 
#define LEDS_CONF_GREEN     LEDS_1
#define LEDS_CONF_YELLOW    LEDS_2
#define LEDS_CONF_RED       LEDS_3
#define LEDS_CONF_BLUE      LEDS_4
 
#define LEDS_CONF_ALL  (LEDS_1 | LEDS_2 | LEDS_3 | LEDS_4)
 
/**
 * \brief If set to 1 then LED1 and LED2 are used by the
 *        platform to indicate BLE connection state.
 */
#define PLATFORM_INDICATE_BLE_STATE             1
/** @} */
 
/**
 * \name Button configurations
 *
 * @{
 */
/* Notify various examples that we have Buttons */
#define PLATFORM_HAS_BUTTON      1
 
/*
 * Override button symbols from dev/button-sensor.h, for the examples that
 * include it
 */
#define button_sensor button_1
#define button_sensor2 button_2
 
/**
 * \brief nRF52 RTC instance to be used for Contiki clock driver.
 * \note RTC 0 is used by the SoftDevice.
 */
#define PLATFORM_RTC_INSTANCE_ID     1
 
/**
 * \brief nRF52 timer instance to be used for Contiki rtimer driver.
 * \note Timer 0 is used by the SoftDevice.
 */
#define PLATFORM_TIMER_INSTANCE_ID   1
 
/** @} */
/*---------------------------------------------------------------------------*/
/** @}
 *  @}
 *  @}
 */
#endif /* NRF52DK_DEF_H_ */