Contiki-NG
arch
platform
zoul
contiki-conf.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2015, Zolertia - http://www.zolertia.com
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
*
14
* 3. Neither the name of the copyright holder nor the names of its
15
* contributors may be used to endorse or promote products derived
16
* from this software without specific prior written permission.
17
*
18
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
19
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
20
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
21
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
22
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
23
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
24
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
25
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
27
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
29
* OF THE POSSIBILITY OF SUCH DAMAGE.
30
*/
31
/**
32
* \addtogroup zoul-core
33
* @{
34
*
35
* \defgroup zoul-platforms Zolertia Zoul platforms
36
*
37
* The Zoul allows a fast reuse and easy integration to most applications and
38
* products. Its small size and module format eases to place in different PCB
39
* designs and to integrate in existing products. The Zoul-based platforms
40
* share most of the Zoul core implementation.
41
*
42
* \file
43
* Configuration for the Zoul-based platforms
44
*/
45
#ifndef CONTIKI_CONF_H_
46
#define CONTIKI_CONF_H_
47
48
#include <stdint.h>
49
#include <string.h>
50
#include <inttypes.h>
51
/*---------------------------------------------------------------------------*/
52
/* Include Project Specific conf */
53
#ifdef PROJECT_CONF_PATH
54
#include PROJECT_CONF_PATH
55
#endif
/* PROJECT_CONF_PATH */
56
/*---------------------------------------------------------------------------*/
57
#include "cc2538-def.h"
58
59
unsigned
radio_phy_overhead(
void
);
60
unsigned
radio_byte_air_time(
void
);
61
unsigned
radio_delay_before_tx(
void
);
62
unsigned
radio_delay_before_rx(
void
);
63
unsigned
radio_delay_before_detect(
void
);
64
uint16_t *radio_tsch_timeslot_timing(
void
);
65
66
/** @} */
67
/*---------------------------------------------------------------------------*/
68
69
#define RADIO_PHY_OVERHEAD radio_phy_overhead()
70
#define RADIO_BYTE_AIR_TIME radio_byte_air_time()
71
#define RADIO_DELAY_BEFORE_TX radio_delay_before_tx()
72
#define RADIO_DELAY_BEFORE_RX radio_delay_before_rx()
73
#define RADIO_DELAY_BEFORE_DETECT radio_delay_before_detect()
74
75
#define TSCH_CONF_DEFAULT_TIMESLOT_TIMING radio_tsch_timeslot_timing()
76
77
/*---------------------------------------------------------------------------*/
78
/**
79
* \name Serial Boot Loader Backdoor configuration
80
*
81
* @{
82
*/
83
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR
84
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR 1
/**<Enable the boot loader backdoor */
85
#endif
86
87
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN
88
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_PORT_A_PIN 3
/**< Pin PA_3 (user button), activates the boot loader */
89
#endif
90
91
#ifndef FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH
92
#define FLASH_CCA_CONF_BOOTLDR_BACKDOOR_ACTIVE_HIGH 0
/**< A logic low level activates the boot loader */
93
#endif
94
/** @} */
95
/*---------------------------------------------------------------------------*/
96
/**
97
* \name CC2538 System Control configuration
98
*
99
* @{
100
*/
101
#ifndef SYS_CTRL_CONF_OSC32K_USE_XTAL
102
#define SYS_CTRL_CONF_OSC32K_USE_XTAL 1
/**< Use the on-board 32.768-kHz crystal */
103
#endif
104
/** @} */
105
/*---------------------------------------------------------------------------*/
106
/* board.h assumes that basic configuration is done */
107
#include "board.h"
108
109
#define PLATFORM_SUPPORTS_BUTTON_HAL PLATFORM_HAS_BUTTON
110
/*---------------------------------------------------------------------------*/
111
/**
112
* \name Radio Configuration
113
*
114
* @{
115
*/
116
#ifndef ZOUL_CONF_USE_CC1200_RADIO
117
#define ZOUL_CONF_USE_CC1200_RADIO 0
118
#endif
119
120
#if ZOUL_CONF_USE_CC1200_RADIO
121
#define NETSTACK_CONF_RADIO cc1200_driver
122
#define ANTENNA_SW_SELECT_DEF_CONF ANTENNA_SW_SELECT_SUBGHZ
123
#define CC1200_CONF_USE_GPIO2 0
124
#define CC1200_CONF_USE_RX_WATCHDOG 0
125
126
#define CSMA_CONF_ACK_WAIT_TIME (RTIMER_SECOND / 200)
127
#define CSMA_CONF_AFTER_ACK_DETECTED_WAIT_TIME (RTIMER_SECOND / 1500)
128
129
#ifndef CC1200_CONF_RF_CFG
130
#define CC1200_CONF_RF_CFG cc1200_802154g_863_870_fsk_50kbps
131
#endif
132
#endif
133
134
/* This can be overriden to use the cc1200_driver instead */
135
#ifndef NETSTACK_CONF_RADIO
136
#define NETSTACK_CONF_RADIO cc2538_rf_driver
137
#endif
138
139
/*
140
* RE-Mote specific:
141
* If dual RF enabled, we set the RF switch to enable the CC1200 and use 2.4GHz
142
* on the available uFl/chip antenna (not mounted as default). In contiki main
143
* platform routine we set the right antenna depending on NETSTACK_CONF_RADIO,
144
* but as changing the RF antenna also implies enabling/disabling the CC1200,
145
* is better to start off with the right configuration
146
*/
147
#if REMOTE_DUAL_RF_ENABLED
148
#define ANTENNA_SW_SELECT_DEFAULT ANTENNA_SW_SELECT_SUBGHZ
149
#else
/* REMOTE_DUAL_RF_ENABLED */
150
#ifndef ANTENNA_SW_SELECT_DEF_CONF
151
#define ANTENNA_SW_SELECT_DEFAULT ANTENNA_SW_SELECT_2_4GHZ
152
#else
/* ANTENNA_SW_SELECT_DEF_CONF */
153
#define ANTENNA_SW_SELECT_DEFAULT ANTENNA_SW_SELECT_DEF_CONF
154
#endif
/* ANTENNA_SW_SELECT_DEF_CONF */
155
#endif
/* REMOTE_DUAL_RF_ENABLED */
156
157
/** @} */
158
/*---------------------------------------------------------------------------*/
159
/**
160
* \name LPM configuration
161
* @{
162
*/
163
#ifndef LPM_CONF_ENABLE
164
#define LPM_CONF_ENABLE 1
/**< Set to 0 to disable LPM entirely */
165
#endif
166
167
/**
168
* \brief Maximum PM
169
*
170
* The SoC will never drop to a Power Mode deeper than the one specified here.
171
* 0 for PM0, 1 for PM1 and 2 for PM2
172
*/
173
#ifndef LPM_CONF_MAX_PM
174
#define LPM_CONF_MAX_PM 2
175
#endif
176
177
#ifndef LPM_CONF_STATS
178
#define LPM_CONF_STATS 0
/**< Set to 1 to enable LPM-related stats */
179
#endif
180
/** @} */
181
/*---------------------------------------------------------------------------*/
182
/**
183
* \name RTC
184
*
185
* @{
186
*/
187
#ifdef PLATFORM_HAS_RTC
188
189
#ifndef RTC_CONF_INIT
190
#define RTC_CONF_INIT 0
/**< Whether to initialize the RTC */
191
#endif
192
193
#ifndef RTC_CONF_SET_FROM_SYS
194
#define RTC_CONF_SET_FROM_SYS 0
/**< Whether to set the RTC from the build system */
195
#endif
196
197
#else
198
#undef RTC_CONF_INIT
199
#define RTC_CONF_INIT 0
200
#endif
201
/** @} */
202
/*---------------------------------------------------------------------------*/
203
/* Include CPU-related configuration */
204
#include "cc2538-conf.h"
205
/*---------------------------------------------------------------------------*/
206
#endif
/* CONTIKI_CONF_H_ */
207
/*---------------------------------------------------------------------------*/
208
/** @} */
Generated on Tue Dec 8 2020 18:54:51 for Contiki-NG by
1.8.13