Contiki-NG
board.h
Go to the documentation of this file.
1 /*
2  * Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  * notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  * notice, this list of conditions and the following disclaimer in the
12  * documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holder nor the names of its
14  * contributors may be used to endorse or promote products derived
15  * from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21  * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28  * OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 /*---------------------------------------------------------------------------*/
31 /** \addtogroup launchpad-peripherals
32  * @{
33  *
34  * \defgroup launchpad-cc1350-specific CC1350 LaunchPad Peripherals
35  *
36  * Defines related to the CC1350 LaunchPad
37  *
38  * This file provides connectivity information on LEDs, Buttons, UART and
39  * other peripherals
40  *
41  * This file is not meant to be modified by the user.
42  * @{
43  *
44  * \file
45  * Header file with definitions related to the I/O connections on the TI
46  * CC1350 LaunchPad
47  *
48  * \note Do not include this file directly. It gets included by contiki-conf
49  * after all relevant directives have been set.
50  */
51 /*---------------------------------------------------------------------------*/
52 #ifndef BOARD_H_
53 #define BOARD_H_
54 /*---------------------------------------------------------------------------*/
55 #include "ioc.h"
56 /*---------------------------------------------------------------------------*/
57 /**
58  * \name LED HAL configuration
59  *
60  * Those values are not meant to be modified by the user
61  * @{
62  */
63 #define LEDS_CONF_COUNT 2
64 #define LEDS_CONF_RED 1
65 #define LEDS_CONF_GREEN 2
66 /** @} */
67 /*---------------------------------------------------------------------------*/
68 /**
69  * \name LED IOID mappings
70  *
71  * Those values are not meant to be modified by the user
72  * @{
73  */
74 #define BOARD_IOID_LED_1 IOID_6
75 #define BOARD_IOID_LED_2 IOID_7
76 /** @} */
77 /*---------------------------------------------------------------------------*/
78 /**
79  * \name UART IOID mapping
80  *
81  * Those values are not meant to be modified by the user
82  * @{
83  */
84 #define BOARD_IOID_UART_RX IOID_2
85 #define BOARD_IOID_UART_TX IOID_3
86 #define BOARD_IOID_UART_RTS IOID_18
87 #define BOARD_IOID_UART_CTS IOID_19
88 #define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
89 #define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
90 #define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
91 #define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
92 /** @} */
93 /*---------------------------------------------------------------------------*/
94 /**
95  * \name Button IOID mapping
96  *
97  * Those values are not meant to be modified by the user
98  * @{
99  */
100 #define BOARD_IOID_KEY_LEFT IOID_13
101 #define BOARD_IOID_KEY_RIGHT IOID_14
102 #define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
103 #define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
104 /** @} */
105 /*---------------------------------------------------------------------------*/
106 /**
107  * \name External flash IOID mapping
108  *
109  * Those values are not meant to be modified by the user
110  * @{
111  */
112 #define EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0
113 
114 #define EXT_FLASH_SPI_PIN_SCK IOID_10
115 #define EXT_FLASH_SPI_PIN_MOSI IOID_9
116 #define EXT_FLASH_SPI_PIN_MISO IOID_8
117 #define EXT_FLASH_SPI_PIN_CS IOID_20
118 
119 #define EXT_FLASH_DEVICE_ID 0x14
120 #define EXT_FLASH_MID 0xC2
121 
122 #define EXT_FLASH_PROGRAM_PAGE_SIZE 256
123 #define EXT_FLASH_ERASE_SECTOR_SIZE 4096
124 /*---------------------------------------------------------------------------*/
125 /**
126  * \brief I2C IOID mappings
127  *
128  * Those values are not meant to be modified by the user
129  * @{
130  */
131 #define BOARD_IOID_SCL IOID_4
132 #define BOARD_IOID_SDA IOID_5
133 /** @} */
134 /*---------------------------------------------------------------------------*/
135 /**
136  * \brief CC1350LP RF Switch
137  *
138  * Those values are not meant to be modified by the user
139  * @{
140  */
141 #define RF_SWITCH_CONF_ENABLE 1
142 /** @} */
143 /*---------------------------------------------------------------------------*/
144 /**
145  * \brief TX power settings
146  *
147  * Those values are not meant to be modified by the user
148  * @{
149  */
150 #define PROP_MODE_CONF_TX_POWER_779_930 tx_power_driver_779_930
151 /** @} */
152 /*---------------------------------------------------------------------------*/
153 /**
154  * \brief ROM bootloader configuration
155  *
156  * Change CCXXWARE_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which
157  * button triggers the bootloader on reset. Use CCXXWARE_CONF_BL_LEVEL to
158  * control the pin level that enables the bootloader (0: low, 1: high). It is
159  * also possible to use any other externally-controlled DIO.
160  * @{
161  */
162 #define CCXXWARE_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT
163 #define CCXXWARE_CONF_BL_LEVEL 0
164 /** @} */
165 /*---------------------------------------------------------------------------*/
166 /**
167  * \brief Remaining pins
168  *
169  * Those values are not meant to be modified by the user
170  * @{
171  */
172 #define BOARD_IOID_CS IOID_11
173 #define BOARD_IOID_TDO IOID_16
174 #define BOARD_IOID_TDI IOID_17
175 #define BOARD_IOID_DIO12 IOID_12
176 #define BOARD_IOID_DIO15 IOID_15
177 #define BOARD_IOID_DIO21 IOID_21
178 #define BOARD_IOID_DIO22 IOID_22
179 #define BOARD_IOID_DIO23 IOID_23
180 #define BOARD_IOID_DIO24 IOID_24
181 #define BOARD_IOID_DIO25 IOID_25
182 #define BOARD_IOID_DIO26 IOID_26
183 #define BOARD_IOID_DIO27 IOID_27
184 #define BOARD_IOID_DIO28 IOID_28
185 #define BOARD_IOID_DIO29 IOID_29
186 #define BOARD_IOID_DIO30 IOID_30
187 
188 #define BOARD_UNUSED_PINS { \
189  BOARD_IOID_CS, BOARD_IOID_TDO, BOARD_IOID_TDI, BOARD_IOID_DIO12, \
190  BOARD_IOID_DIO15, BOARD_IOID_DIO21, BOARD_IOID_DIO22, BOARD_IOID_DIO23, \
191  BOARD_IOID_DIO24, BOARD_IOID_DIO25, BOARD_IOID_DIO26, BOARD_IOID_DIO27, \
192  BOARD_IOID_DIO28, BOARD_IOID_DIO29, \
193  IOID_UNUSED \
194  }
195 /** @} */
196 /*---------------------------------------------------------------------------*/
197 /**
198  * \brief Board indices for the button HAL
199  *
200  * Those values are not meant to be modified by the user
201  * @{
202  */
203 #define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00
204 #define BOARD_BUTTON_HAL_INDEX_KEY_RIGHT 0x01
205 /** @} */
206 /*---------------------------------------------------------------------------*/
207 /**
208  * \name Device string used on startup
209  * @{
210  */
211 #define BOARD_STRING "TI CC1350 LaunchPad"
212 /** @} */
213 /*---------------------------------------------------------------------------*/
214 #endif /* BOARD_H_ */
215 /*---------------------------------------------------------------------------*/
216 /**
217  * @}
218  * @}
219  */
Header file with declarations for the I/O Control module.