Contiki-NG
arch
platform
cc26x0-cc13x0
sensortag
cc2650
board.h
Go to the documentation of this file.
1
/*
2
* Copyright (c) 2014, Texas Instruments Incorporated - http://www.ti.com/
3
* All rights reserved.
4
*
5
* Redistribution and use in source and binary forms, with or without
6
* modification, are permitted provided that the following conditions
7
* are met:
8
* 1. Redistributions of source code must retain the above copyright
9
* notice, this list of conditions and the following disclaimer.
10
* 2. Redistributions in binary form must reproduce the above copyright
11
* notice, this list of conditions and the following disclaimer in the
12
* documentation and/or other materials provided with the distribution.
13
* 3. Neither the name of the copyright holder nor the names of its
14
* contributors may be used to endorse or promote products derived
15
* from this software without specific prior written permission.
16
*
17
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28
* OF THE POSSIBILITY OF SUCH DAMAGE.
29
*/
30
/*---------------------------------------------------------------------------*/
31
/** \addtogroup cc26xx-srf-tag
32
* @{
33
*
34
* \defgroup sensortag-cc26xx-specific CC2650 Sensortag Peripherals
35
*
36
* Defines related to the CC2650 Sensortag
37
*
38
* This file provides connectivity information on LEDs, Buttons, UART and
39
* other peripherals
40
*
41
* This file can be used as the basis to configure other boards using the
42
* CC13xx/CC26xx code as their basis.
43
*
44
* This file is not meant to be modified by the user.
45
* @{
46
*
47
* \file
48
* Header file with definitions related to the I/O connections on the TI
49
* Sensortag
50
*
51
* \note Do not include this file directly. It gets included by contiki-conf
52
* after all relevant directives have been set.
53
*/
54
/*---------------------------------------------------------------------------*/
55
#ifndef BOARD_H_
56
#define BOARD_H_
57
/*---------------------------------------------------------------------------*/
58
#include "
ioc.h
"
59
/*---------------------------------------------------------------------------*/
60
/**
61
* \name LED HAL configuration
62
*
63
* Those values are not meant to be modified by the user
64
* @{
65
*/
66
#define LEDS_CONF_COUNT 2
67
#define LEDS_CONF_RED 1
68
#define LEDS_CONF_GREEN 2
69
/** @} */
70
/*---------------------------------------------------------------------------*/
71
/**
72
* \name LED IOID mappings
73
*
74
* Those values are not meant to be modified by the user
75
* @{
76
*/
77
#define BOARD_IOID_LED_1 IOID_10
78
#define BOARD_IOID_LED_2 IOID_15
79
/** @} */
80
/*---------------------------------------------------------------------------*/
81
/**
82
* \name UART IOID mapping
83
*
84
* Those values are not meant to be modified by the user
85
* @{
86
*/
87
#define BOARD_IOID_DP4_UARTRX IOID_28
88
#define BOARD_IOID_DP5_UARTTX IOID_29
89
90
#if BOARD_CONF_DEBUGGER_DEVPACK
91
#define BOARD_IOID_UART_RX BOARD_IOID_DP4_UARTRX
92
#define BOARD_IOID_UART_TX BOARD_IOID_DP5_UARTTX
93
#else
94
#define BOARD_IOID_UART_RX IOID_17
95
#define BOARD_IOID_UART_TX IOID_16
96
#endif
97
98
#define BOARD_IOID_UART_CTS IOID_UNUSED
99
#define BOARD_IOID_UART_RTS IOID_UNUSED
100
#define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
101
#define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
102
#define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
103
#define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
104
/** @} */
105
/*---------------------------------------------------------------------------*/
106
/**
107
* \name Button IOID mapping
108
*
109
* Those values are not meant to be modified by the user
110
* @{
111
*/
112
#define BOARD_IOID_KEY_LEFT IOID_0
113
#define BOARD_IOID_KEY_RIGHT IOID_4
114
#define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
115
#define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
116
/** @} */
117
/*---------------------------------------------------------------------------*/
118
/**
119
* \name Buzzer configuration
120
* @{
121
*/
122
#define BOARD_IOID_BUZZER IOID_21
/**< Buzzer Pin */
123
/** @} */
124
/*---------------------------------------------------------------------------*/
125
/**
126
* \name Reed Relay IOID mapping
127
*
128
* Those values are not meant to be modified by the user
129
* @{
130
*/
131
#define BOARD_IOID_REED_RELAY IOID_3
132
/** @} */
133
/*---------------------------------------------------------------------------*/
134
/**
135
* \name External flash IOID mapping
136
*
137
* Those values are not meant to be modified by the user
138
* @{
139
*/
140
#define EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0
141
142
#define EXT_FLASH_SPI_PIN_SCK IOID_17
143
#define EXT_FLASH_SPI_PIN_MOSI IOID_19
144
#define EXT_FLASH_SPI_PIN_MISO IOID_18
145
#define EXT_FLASH_SPI_PIN_CS IOID_14
146
147
#if SENSORTAG_CC2650_REV_1_2_0
148
#define EXT_FLASH_DEVICE_ID 0x12
149
#define EXT_FLASH_MID 0xEF
150
#else
151
#define EXT_FLASH_DEVICE_ID 0x14
152
#define EXT_FLASH_MID 0xC2
153
#endif
154
155
#define EXT_FLASH_PROGRAM_PAGE_SIZE 256
156
#define EXT_FLASH_ERASE_SECTOR_SIZE 4096
157
/** @} */
158
/*---------------------------------------------------------------------------*/
159
/**
160
* \brief I2C IOID mappings
161
*
162
* Those values are not meant to be modified by the user
163
* @{
164
*/
165
#define BOARD_IOID_SDA IOID_5
/**< Interface 0 SDA: All sensors bar MPU */
166
#define BOARD_IOID_SCL IOID_6
/**< Interface 0 SCL: All sensors bar MPU */
167
#define BOARD_IOID_SDA_HP IOID_8
/**< Interface 1 SDA: MPU */
168
#define BOARD_IOID_SCL_HP IOID_9
/**< Interface 1 SCL: MPU */
169
/** @} */
170
/*---------------------------------------------------------------------------*/
171
/**
172
* \brief MPU IOID mappings
173
*
174
* Those values are not meant to be modified by the user
175
* @{
176
*/
177
#define BOARD_IOID_MPU_INT IOID_7
178
#define BOARD_IOID_MPU_POWER IOID_12
179
#define BOARD_MPU_INT (1 << BOARD_IOID_MPU_INT)
180
#define BOARD_MPU_POWER (1 << BOARD_IOID_MPU_POWER)
181
/** @} */
182
/*---------------------------------------------------------------------------*/
183
/**
184
* \brief Board devpack IOID mappings (LCD etc.)
185
*
186
* Those values are not meant to be modified by the user
187
* @{
188
*/
189
#define BOARD_IOID_AUDIOFS_TDO IOID_16
190
#define BOARD_IOID_DEVPACK_CS IOID_20
191
#define BOARD_IOID_DEVPK_LCD_EXTCOMIN IOID_22
192
#define BOARD_IOID_AUDIODO IOID_22
193
#define BOARD_IOID_DP2 IOID_23
194
#define BOARD_IOID_DP1 IOID_24
195
#define BOARD_IOID_DP0 IOID_25
196
#define BOARD_IOID_DP3 IOID_27
197
#define BOARD_IOID_DEVPK_ID IOID_30
198
#define BOARD_DEVPACK_CS (1 << BOARD_IOID_DEVPACK_CS)
199
/** @} */
200
/*---------------------------------------------------------------------------*/
201
/**
202
* \brief TMP Sensor
203
*
204
* Those values are not meant to be modified by the user
205
* @{
206
*/
207
#define BOARD_IOID_TMP_RDY IOID_1
208
/** @} */
209
/*---------------------------------------------------------------------------*/
210
/**
211
* \brief Digital Microphone
212
*
213
* Those values are not meant to be modified by the user
214
* @{
215
*/
216
#define BOARD_IOID_MIC_POWER IOID_13
217
#define BOARD_IOID_AUDIO_DI IOID_2
218
#define BOARD_IOID_AUDIO_CLK IOID_11
219
/** @} */
220
/*---------------------------------------------------------------------------*/
221
/**
222
* \brief Board indices for the button HAL
223
*
224
* Those values are not meant to be modified by the user
225
* @{
226
*/
227
#define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00
228
#define BOARD_BUTTON_HAL_INDEX_KEY_RIGHT 0x01
229
#define BOARD_BUTTON_HAL_INDEX_REED_RELAY 0xFF
230
/** @} */
231
/*---------------------------------------------------------------------------*/
232
/**
233
* \brief ROM bootloader configuration
234
*
235
* Sensortags do not support the bootloader
236
* @{
237
*/
238
#define CCXXWARE_CONF_BL_PIN_NUMBER IOID_UNUSED
239
#define CCXXWARE_CONF_BL_LEVEL 0
240
/** @} */
241
/*---------------------------------------------------------------------------*/
242
/**
243
* \name Device string used on startup
244
* @{
245
*/
246
#define BOARD_STRING "TI CC2650 SensorTag"
247
248
/** @} */
249
/*---------------------------------------------------------------------------*/
250
#endif
/* BOARD_H_ */
251
/*---------------------------------------------------------------------------*/
252
/**
253
* @}
254
* @}
255
*/
ioc.h
Header file with declarations for the I/O Control module.
Generated on Sat May 30 2020 17:03:40 for Contiki-NG by
1.8.13