Contiki-NG
board.h
Go to the documentation of this file.
1 /*
2  * Copyright (c) 2016, Texas Instruments Incorporated - http://www.ti.com/
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  * notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  * notice, this list of conditions and the following disclaimer in the
12  * documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holder nor the names of its
14  * contributors may be used to endorse or promote products derived
15  * from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21  * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28  * OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 /*---------------------------------------------------------------------------*/
31 /** \addtogroup launchpad-peripherals
32  * @{
33  *
34  * \defgroup launchpad-cc1310-specific CC1310 LaunchPad Peripherals
35  *
36  * Defines related to the CC1310 LaunchPad
37  *
38  * This file provides connectivity information on LEDs, Buttons, UART and
39  * other peripherals
40  *
41  * This file is not meant to be modified by the user.
42  * @{
43  *
44  * \file
45  * Header file with definitions related to the I/O connections on the TI
46  * CC1310 LaunchPad
47  *
48  * \note Do not include this file directly. It gets included by contiki-conf
49  * after all relevant directives have been set.
50  */
51 /*---------------------------------------------------------------------------*/
52 #ifndef BOARD_H_
53 #define BOARD_H_
54 /*---------------------------------------------------------------------------*/
55 #include "ioc.h"
56 /*---------------------------------------------------------------------------*/
57 /**
58  * \name LED HAL configuration
59  *
60  * Those values are not meant to be modified by the user
61  * @{
62  */
63 #define LEDS_CONF_COUNT 2
64 #define LEDS_CONF_RED 1
65 #define LEDS_CONF_GREEN 2
66 /** @} */
67 /*---------------------------------------------------------------------------*/
68 /**
69  * \name LED IOID mappings
70  *
71  * Those values are not meant to be modified by the user
72  * @{
73  */
74 #define BOARD_IOID_LED_1 IOID_6
75 #define BOARD_IOID_LED_2 IOID_7
76 /** @} */
77 /*---------------------------------------------------------------------------*/
78 /**
79  * \name UART IOID mapping
80  *
81  * Those values are not meant to be modified by the user
82  * @{
83  */
84 #define BOARD_IOID_UART_RX IOID_2
85 #define BOARD_IOID_UART_TX IOID_3
86 #define BOARD_IOID_UART_RTS IOID_18
87 #define BOARD_IOID_UART_CTS IOID_19
88 #define BOARD_UART_RX (1 << BOARD_IOID_UART_RX)
89 #define BOARD_UART_TX (1 << BOARD_IOID_UART_TX)
90 #define BOARD_UART_RTS (1 << BOARD_IOID_UART_RTS)
91 #define BOARD_UART_CTS (1 << BOARD_IOID_UART_CTS)
92 /** @} */
93 /*---------------------------------------------------------------------------*/
94 /**
95  * \name Button IOID mapping
96  *
97  * Those values are not meant to be modified by the user
98  * @{
99  */
100 #define BOARD_IOID_KEY_LEFT IOID_13
101 #define BOARD_IOID_KEY_RIGHT IOID_14
102 #define BOARD_KEY_LEFT (1 << BOARD_IOID_KEY_LEFT)
103 #define BOARD_KEY_RIGHT (1 << BOARD_IOID_KEY_RIGHT)
104 /** @} */
105 /*---------------------------------------------------------------------------*/
106 /**
107  * \name External flash IOID mapping
108  *
109  * Those values are not meant to be modified by the user
110  * @{
111  */
112 #define EXT_FLASH_SPI_CONTROLLER SPI_CONTROLLER_SPI0
113 
114 #define EXT_FLASH_SPI_PIN_SCK IOID_10
115 #define EXT_FLASH_SPI_PIN_MOSI IOID_9
116 #define EXT_FLASH_SPI_PIN_MISO IOID_8
117 #define EXT_FLASH_SPI_PIN_CS IOID_20
118 
119 #define EXT_FLASH_DEVICE_ID 0x14
120 #define EXT_FLASH_MID 0xC2
121 
122 #define EXT_FLASH_PROGRAM_PAGE_SIZE 256
123 #define EXT_FLASH_ERASE_SECTOR_SIZE 4096
124 /** @} */
125 /*---------------------------------------------------------------------------*/
126 /**
127  * \brief I2C IOID mappings
128  *
129  * Those values are not meant to be modified by the user
130  * @{
131  */
132 #define BOARD_IOID_SCL IOID_4
133 #define BOARD_IOID_SDA IOID_5
134 /** @} */
135 /*---------------------------------------------------------------------------*/
136 /**
137  * \brief ROM bootloader configuration
138  *
139  * Change CCXXWARE_CONF_BL_PIN_NUMBER to BOARD_IOID_KEY_xyz to select which
140  * button triggers the bootloader on reset. Use CCXXWARE_CONF_BL_LEVEL to
141  * control the pin level that enables the bootloader (0: low, 1: high). It is
142  * also possible to use any other externally-controlled DIO.
143  * @{
144  */
145 #define CCXXWARE_CONF_BL_PIN_NUMBER BOARD_IOID_KEY_LEFT
146 #define CCXXWARE_CONF_BL_LEVEL 0
147 /** @} */
148 /*---------------------------------------------------------------------------*/
149 /**
150  * \brief Remaining pins
151  *
152  * Those values are not meant to be modified by the user
153  * @{
154  */
155 #define BOARD_IOID_DIO1 IOID_1
156 #define BOARD_IOID_CS IOID_11
157 #define BOARD_IOID_TDO IOID_16
158 #define BOARD_IOID_TDI IOID_17
159 #define BOARD_IOID_DIO12 IOID_12
160 #define BOARD_IOID_DIO15 IOID_15
161 #define BOARD_IOID_DIO21 IOID_21
162 #define BOARD_IOID_DIO22 IOID_22
163 #define BOARD_IOID_DIO23 IOID_23
164 #define BOARD_IOID_DIO24 IOID_24
165 #define BOARD_IOID_DIO25 IOID_25
166 #define BOARD_IOID_DIO26 IOID_26
167 #define BOARD_IOID_DIO27 IOID_27
168 #define BOARD_IOID_DIO28 IOID_28
169 #define BOARD_IOID_DIO29 IOID_29
170 #define BOARD_IOID_DIO30 IOID_30
171 
172 #define BOARD_UNUSED_PINS { \
173  BOARD_IOID_DIO1, BOARD_IOID_CS, BOARD_IOID_TDO, BOARD_IOID_TDI, \
174  BOARD_IOID_DIO12, BOARD_IOID_DIO15, BOARD_IOID_DIO21, BOARD_IOID_DIO22, \
175  BOARD_IOID_DIO23, BOARD_IOID_DIO24, BOARD_IOID_DIO25, BOARD_IOID_DIO26, \
176  BOARD_IOID_DIO27, BOARD_IOID_DIO28, BOARD_IOID_DIO29, BOARD_IOID_DIO30, \
177  IOID_UNUSED \
178  }
179 /** @} */
180 /*---------------------------------------------------------------------------*/
181 /**
182  * \brief Board indices for the button HAL
183  *
184  * Those values are not meant to be modified by the user
185  * @{
186  */
187 #define BOARD_BUTTON_HAL_INDEX_KEY_LEFT 0x00
188 #define BOARD_BUTTON_HAL_INDEX_KEY_RIGHT 0x01
189 /** @} */
190 /*---------------------------------------------------------------------------*/
191 /**
192  * \name Device string used on startup
193  * @{
194  */
195 #define BOARD_STRING "TI CC1310 LaunchPad"
196 
197 /** @} */
198 /*---------------------------------------------------------------------------*/
199 #endif /* BOARD_H_ */
200 /*---------------------------------------------------------------------------*/
201 /**
202  * @}
203  * @}
204  */
Header file with declarations for the I/O Control module.