Contiki-NG
board-conf.h
Go to the documentation of this file.
1 /*
2  * Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  * notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  * notice, this list of conditions and the following disclaimer in the
12  * documentation and/or other materials provided with the distribution.
13  * 3. Neither the name of the copyright holder nor the names of its
14  * contributors may be used to endorse or promote products derived
15  * from this software without specific prior written permission.
16  *
17  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20  * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21  * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28  * OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 /**
31  * \addtogroup cc13xx-cc26xx-platform
32  * @{
33  *
34  * \defgroup sensortag-peripherals Sensortag peripherals
35  *
36  * Defines related to configuring SensorTag peripherals. The two sensortags,
37  * CC1350STK and CC2650STK, are identical to a very large extent.
38  * Everything documented within this group applies to both sensortags.
39  *
40  * @{
41  *
42  * \file
43  * Header file with definitions related to the sensors on the Sensortags
44  * \author
45  * Edvard Pettersen <e.pettersen@ti.com>
46  * \note
47  * This file should not be included directly
48  */
49 /*---------------------------------------------------------------------------*/
50 #ifndef BOARD_CONF_H_
51 #define BOARD_CONF_H_
52 /*---------------------------------------------------------------------------*/
53 #include "rf-conf.h"
54 #include "leds-arch.h"
55 /*---------------------------------------------------------------------------*/
56 /**
57  * \name LED configurations for the dev/leds.h API. The actual LED
58  * configuration of available LEDs are done in leds-arch.h.
59  *
60  * Those values are not meant to be modified by the user
61  * @{
62  */
63 #define PLATFORM_HAS_LEDS 1
64 /** @} */
65 /*---------------------------------------------------------------------------*/
66 /**
67  * \name Button configurations for the dev/button-hal.h API.
68  *
69  * Those values are not meant to be modified by the user
70  * @{
71  */
72 #define PLATFORM_HAS_BUTTON 1
73 #define PLATFORM_SUPPORTS_BUTTON_HAL 1
74 
75 #define BUTTON_HAL_ID_KEY_LEFT 0
76 #define BUTTON_HAL_ID_KEY_RIGHT 1
77 #define BUTTON_HAL_ID_REED_RELAY 2
78 /** @} */
79 /*---------------------------------------------------------------------------*/
80 /**
81  * \name SensorTag does have sensors.
82  *
83  * Those values are not meant to be modified by the user
84  * @{
85  */
86 #define BOARD_CONF_HAS_SENSORS 1
87 /** @} */
88 /*---------------------------------------------------------------------------*/
89 /**
90  * \name Enable or disable the SensorTag sensors.
91  *
92  * Those values are not meant to be modified by the user
93  * @{
94  */
95 #define BOARD_SENSORS_ENABLE (!(BOARD_CONF_SENSORS_DISABLE))
96 /** @} */
97 /*---------------------------------------------------------------------------*/
98 /**
99  * \name The external flash SPI CS pin, defined in Board.h.
100  *
101  * Those values are not meant to be modified by the user
102  * @{
103  */
104 #if TI_SPI_CONF_SPI0_ENABLE
105 #define EXT_FLASH_SPI_CONTROLLER Board_SPI0
106 
107 #define EXT_FLASH_SPI_PIN_SCK Board_SPI0_SCK
108 #define EXT_FLASH_SPI_PIN_MOSI Board_SPI0_MOSI
109 #define EXT_FLASH_SPI_PIN_MISO Board_SPI0_MISO
110 #define EXT_FLASH_SPI_PIN_CS Board_SPI_FLASH_CS
111 
112 #define EXT_FLASH_DEVICE_ID 0x14
113 #define EXT_FLASH_MID 0xC2
114 
115 #define EXT_FLASH_PROGRAM_PAGE_SIZE 256
116 #define EXT_FLASH_ERASE_SECTOR_SIZE 4096
117 #endif /* TI_SPI_CONF_SPI0_ENABLE */
118 /** @} */
119 /*---------------------------------------------------------------------------*/
120 #endif /* BOARD_CONF_H_ */
121 /*---------------------------------------------------------------------------*/
122 /**
123  * @}
124  * @}
125  */