uip-arch.h

Go to the documentation of this file.

/*
 * Copyright (c) 2001, Adam Dunkels.
 * All rights reserved. 
 *
 * Redistribution and use in source and binary forms, with or without 
 * modification, are permitted provided that the following conditions 
 * are met: 
 * 1. Redistributions of source code must retain the above copyright 
 *    notice, this list of conditions and the following disclaimer. 
 * 2. Redistributions in binary form must reproduce the above copyright 
 *    notice, this list of conditions and the following disclaimer in the 
 *    documentation and/or other materials provided with the distribution. 
 * 3. The name of the author may not be used to endorse or promote
 *    products derived from this software without specific prior
 *    written permission.  
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS
 * OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
 * GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
 *
 * This file is part of the uIP TCP/IP stack.
 *
 *
 */
 
/**
 * \file
 * Declarations of architecture specific functions.
 * \author Adam Dunkels <adam@dunkels.com>
 */
 
/**
 * \addtogroup uip
 * {@
 */
 
/**
 * \defgroup uiparch Architecture specific uIP functions
 * @{
 *
 * The functions in the architecture specific module implement the IP
 * check sum and 32-bit additions.
 *
 * The IP checksum calculation is the most computationally expensive
 * operation in the TCP/IP stack and it therefore pays off to
 * implement this in efficient assembler. The purpose of the uip-arch
 * module is to let the checksum functions to be implemented in
 * architecture specific assembler.
 *
 */
 
#ifndef UIP_ARCH_H_
#define UIP_ARCH_H_
 
#include "net/ipv6/uip.h"
 
/**
 * Carry out a 32-bit addition.
 *
 * Because not all architectures for which uIP is intended has native
 * 32-bit arithmetic, uIP uses an external C function for doing the
 * required 32-bit additions in the TCP protocol processing. This
 * function should add the two arguments and place the result in the
 * global variable uip_acc32.
 *
 * \note The 32-bit integer pointed to by the op32 parameter and the
 * result in the uip_acc32 variable are in network byte order (big
 * endian).
 *
 * \param op32 A pointer to a 4-byte array representing a 32-bit
 * integer in network byte order (big endian).
 *
 * \param op16 A 16-bit integer in host byte order.
 */
void uip_add32(uint8_t *op32, uint16_t op16);
 
/**
 * Calculate the IP header checksum of the packet header in uip_buf.
 *
 * The IP header checksum is the Internet checksum of the 20 bytes of
 * the IP header.
 *
 * \return The IP header checksum of the IP header in the uip_buf
 * buffer.
 */
uint16_t uip_ipchksum(void);
 
/**
 * Calculate the TCP checksum of the packet in uip_buf and uip_appdata.
 *
 * The TCP checksum is the Internet checksum of data contents of the
 * TCP segment, and a pseudo-header as defined in RFC793.
 *
 * \return The TCP checksum of the TCP segment in uip_buf and pointed
 * to by uip_appdata.
 */
uint16_t uip_tcpchksum(void);
 
uint16_t uip_udpchksum(void);
 
/** @} */
 
#endif /* UIP_ARCH_H_ */