Contiki-NG
Loading...
Searching...
No Matches
board-conf.h
Go to the documentation of this file.
1/*
2 * Copyright (c) 2018, Texas Instruments Incorporated - http://www.ti.com/
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * 3. Neither the name of the copyright holder nor the names of its
14 * contributors may be used to endorse or promote products derived
15 * from this software without specific prior written permission.
16 *
17 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
18 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
19 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
20 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
21 * COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
23 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
26 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
28 * OF THE POSSIBILITY OF SUCH DAMAGE.
29 */
30/**
31 * \addtogroup cc13xx-cc26xx-platform
32 * @{
33 *
34 * \defgroup launchpad-peripherals LaunchPad peripherals
35 *
36 * Defines related to configuring LaunchPad peripherals. All LaunchPads
37 * are identical to a very large extent. Everything documented within this
38 * group applies to both sensortags
39 *
40 * @{
41 *
42 * \file
43 * Header file with definitions related to LaunchPad boards.
44 * \author
45 * Edvard Pettersen <e.pettersen@ti.com>
46 * \note
47 * This file should not be included directly
48 */
49/*---------------------------------------------------------------------------*/
50#ifndef BOARD_CONF_H_
51#define BOARD_CONF_H_
52/*---------------------------------------------------------------------------*/
53#include "rf-conf.h"
54/*---------------------------------------------------------------------------*/
55/**
56 * \name LED configurations for the dev/leds.h API.
57 *
58 * Those values are not meant to be modified by the user
59 * @{
60 */
61#define PLATFORM_HAS_LEDS 1
62
63#define LEDS_CONF_COUNT 2
64
65#define LEDS_CONF_RED 0
66#define LEDS_CONF_GREEN 1
67
68#define LEDS_CONF_ALL ((1 << LEDS_CONF_COUNT) - 1)
69/** @} */
70/*---------------------------------------------------------------------------*/
71/**
72 * \name Button configurations for the dev/button-hal.h API.
73 *
74 * Those values are not meant to be modified by the user
75 * @{
76 */
77#define PLATFORM_HAS_BUTTON 1
78#define PLATFORM_SUPPORTS_BUTTON_HAL 1
79
80#define BUTTON_HAL_ID_KEY_LEFT 0
81#define BUTTON_HAL_ID_KEY_RIGHT 1
82/** @} */
83/*---------------------------------------------------------------------------*/
84/**
85 * \name LaunchPad does not have any sensors.
86 *
87 * Those values are not meant to be modified by the user
88 * @{
89 */
90#define BOARD_CONF_HAS_SENSORS 0
91/** @} */
92/*---------------------------------------------------------------------------*/
93/**
94 * \name The external flash SPI CS pin, defined in Board.h.
95 *
96 * Note that SPI SCK, MOSI and MISO does not need to be defined, as they are
97 * implicitly defined via the Board_SPI0 controller.
98 *
99 * Those values are not meant to be modified by the user
100 * @{
101 */
102#if TI_SPI_CONF_SPI0_ENABLE
103#define EXT_FLASH_SPI_CONTROLLER Board_SPI0
104
105#define EXT_FLASH_SPI_PIN_SCK Board_SPI0_SCK
106#define EXT_FLASH_SPI_PIN_MOSI Board_SPI0_MOSI
107#define EXT_FLASH_SPI_PIN_MISO Board_SPI0_MISO
108#define EXT_FLASH_SPI_PIN_CS Board_SPI_FLASH_CS
109
110#define EXT_FLASH_DEVICE_ID 0x14
111#define EXT_FLASH_MID 0xC2
112
113#define EXT_FLASH_PROGRAM_PAGE_SIZE 256
114#define EXT_FLASH_ERASE_SECTOR_SIZE 4096
115#endif /* TI_SPI_CONF_SPI0_ENABLE */
116/** @} */
117/*---------------------------------------------------------------------------*/
118#endif /* BOARD_CONF_H_ */
119/*---------------------------------------------------------------------------*/
120/**
121 * @}
122 * @}
123 */