clock.c

/*
 * Copyright (c) 2011, Swedish Institute of Computer Science
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the Institute nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * This file is part of the Contiki operating system.
 */
 
#include "contiki.h"
#include "sys/clock.h"
#include "sys/etimer.h"
#include "sys/energest.h"
#include "rtimer-arch.h"
#include "dev/watchdog.h"
#include "isr_compat.h"
 
#define INTERVAL (RTIMER_ARCH_SECOND / CLOCK_SECOND)
 
#define MAX_TICKS (~((clock_time_t)0) / 2)
 
#define HW_CLOCK_LT(a, b) ((int16_t)((a)-(b)) < 0)
 
static volatile unsigned long seconds;
 
static volatile clock_time_t count = 0;
/* last_tar is used for calculating clock_fine, last_ccr might be better? */
static volatile uint16_t last_tar = 0;
/*---------------------------------------------------------------------------*/
static inline uint16_t
read_tar(void)
{
  /* Same as clock_counter(), but can be inlined */
  uint16_t t1, t2;
  do {
    t1 = TA1R;
    t2 = TA1R;
  } while(t1 != t2);
  return t1;
}
/*---------------------------------------------------------------------------*/
ISR(TIMER1_A1, timera1)
{
  /* watchdog_start(); */
 
  if(TA1IV == 2) {
 
    /* HW timer bug fix: Interrupt handler called before TR==CCR.
     * Occurs when timer state is toggled between STOP and CONT. */
    while(TA1CTL & MC1 && TA1CCR1 - TA1R == 1);
 
    last_tar = read_tar();
    /* Make sure interrupt time is future */
    while(!HW_CLOCK_LT(last_tar, TA1CCR1)) {
      TA1CCR1 += INTERVAL;
      ++count;
 
      /* Make sure the CLOCK_CONF_SECOND is a power of two, to ensure
         that the modulo operation below becomes a logical and and not
         an expensive divide. Algorithm from Wikipedia:
         http://en.wikipedia.org/wiki/Power_of_two */
#if (CLOCK_CONF_SECOND & (CLOCK_CONF_SECOND - 1)) != 0
#error CLOCK_CONF_SECOND must be a power of two (i.e., 1, 2, 4, 8, 16, 32, 64, ...).
#error Change CLOCK_CONF_SECOND in contiki-conf.h.
#endif
      if(count % CLOCK_CONF_SECOND == 0) {
        ++seconds;
        energest_flush();
      }
      last_tar = read_tar();
    }
 
    if(etimer_pending() &&
       (etimer_next_expiration_time() - count - 1) > MAX_TICKS) {
      etimer_request_poll();
      LPM4_EXIT;
    }
 
  }
  /*  if(process_nevents() >= 0) {
    LPM4_EXIT;
    }*/
 
  /* watchdog_stop(); */
}
/*---------------------------------------------------------------------------*/
clock_time_t
clock_time(void)
{
  clock_time_t t1, t2;
  do {
    t1 = count;
    t2 = count;
  } while(t1 != t2);
  return t1;
}
/*---------------------------------------------------------------------------*/
void
clock_set(clock_time_t clock, clock_time_t fclock)
{
  TA1R = fclock;
  TA1CCR1 = fclock + INTERVAL;
  count = clock;
}
/*---------------------------------------------------------------------------*/
int
clock_fine_max(void)
{
  return INTERVAL;
}
/*---------------------------------------------------------------------------*/
unsigned short
clock_fine(void)
{
  unsigned short t;
  /* Assign last_tar to local varible that can not be changed by interrupt */
  t = last_tar;
  /* perform calc based on t, TAR will not be changed during interrupt */
  return (unsigned short) (TA1R - t);
}
/*---------------------------------------------------------------------------*/
void
clock_init(void)
{
  dint();
 
  /* Select SMCLK (2.4576MHz), clear TAR */
  /* TACTL = TASSEL1 | TACLR | ID_3; */
 
  /* Select ACLK 32768Hz clock, divide by 2 */
/*   TA1CTL = TASSEL0 | TACLR | ID_1; */
 
#if INTERVAL==32768/CLOCK_SECOND
  TA1CTL = TASSEL0 | TACLR;
#elif INTERVAL==16384/CLOCK_SECOND
  TA1CTL = TASSEL0 | TACLR | ID_1;
#else
#error NEED TO UPDATE clock.c to match interval!
#endif
 
  /* Initialize ccr1 to create the X ms interval. */
  /* CCR1 interrupt enabled, interrupt occurs when timer equals CCR1. */
  TA1CCTL1 = CCIE;
 
  /* Interrupt after X ms. */
  TA1CCR1 = INTERVAL;
 
  /* Start Timer_A in continuous mode. */
  TA1CTL |= MC1;
 
  count = 0;
 
  /* Enable interrupts. */
  eint();
 
}
/*---------------------------------------------------------------------------*/
/**
 * Delay the CPU for a multiple of 2.83 us.
 */
void
clock_delay(unsigned int i)
{
  while(i--) {
    _NOP();
  }
}
/*---------------------------------------------------------------------------*/
/*
 * Wait for a multiple of 10 ms.
 *
 */
void
clock_wait(clock_time_t i)
{
  clock_time_t start;
 
  start = clock_time();
  while(clock_time() - start < (clock_time_t)i);
}
/*---------------------------------------------------------------------------*/
void
clock_set_seconds(unsigned long sec)
{
  int s;
  s = splhigh();
  seconds = sec;
  splx(s);
}
/*---------------------------------------------------------------------------*/
unsigned long
clock_seconds(void)
{
  unsigned long t1, t2;
  do {
    t1 = seconds;
    t2 = seconds;
  } while(t1 != t2);
  return t1;
}
/*---------------------------------------------------------------------------*/
rtimer_clock_t
clock_counter(void)
{
  rtimer_clock_t t1, t2;
  do {
    t1 = TA1R;
    t2 = TA1R;
  } while(t1 != t2);
  return t1;
}
/*---------------------------------------------------------------------------*/