sl_uartdrv_usart_vcom_config.h

Go to the documentation of this file.

/***************************************************************************//**
 * @file
 * @brief UARTDRV_USART Config
 *******************************************************************************
 * # License
 * <b>Copyright 2019 Silicon Laboratories Inc. www.silabs.com</b>
 *******************************************************************************
 *
 * The licensor of this software is Silicon Laboratories Inc. Your use of this
 * software is governed by the terms of Silicon Labs Master Software License
 * Agreement (MSLA) available at
 * www.silabs.com/about-us/legal/master-software-license-agreement. This
 * software is distributed to you in Source Code format and is governed by the
 * sections of the MSLA applicable to Source Code.
 *
 ******************************************************************************/
 
#ifndef SL_UARTDRV_USART_VCOM_CONFIG_H
#define SL_UARTDRV_USART_VCOM_CONFIG_H
 
#include "em_usart.h"
// <<< Use Configuration Wizard in Context Menu >>>
 
// <h> UART settings
// <o SL_UARTDRV_USART_VCOM_BAUDRATE> Baud rate
// <i> Default: 115200
#define SL_UARTDRV_USART_VCOM_BAUDRATE        115200
 
// <o SL_UARTDRV_USART_VCOM_PARITY> Parity mode to use
// <usartNoParity=> No Parity
// <usartEvenParity=> Even parity
// <usartOddParity=> Odd parity
// <i> Default: usartNoParity
#define SL_UARTDRV_USART_VCOM_PARITY          usartNoParity
 
// <o SL_UARTDRV_USART_VCOM_STOP_BITS> Number of stop bits to use.
// <usartStopbits0p5=> 0.5 stop bits
// <usartStopbits1=> 1 stop bits
// <usartStopbits1p5=> 1.5 stop bits
// <usartStopbits2=> 2 stop bits
// <i> Default: usartStopbits1
#define SL_UARTDRV_USART_VCOM_STOP_BITS       usartStopbits1
 
// <o SL_UARTDRV_USART_VCOM_FLOW_CONTROL_TYPE> Flow control method
// <uartdrvFlowControlNone=> None
// <uartdrvFlowControlSw=> Software XON/XOFF
// <uartdrvFlowControlHw=> nRTS/nCTS hardware handshake
// <uartdrvFlowControlHwUart=> UART peripheral controls nRTS/nCTS
// <i> Default: uartdrvFlowControlHw
#define SL_UARTDRV_USART_VCOM_FLOW_CONTROL_TYPE uartdrvFlowControlSw
 
// <o SL_UARTDRV_USART_VCOM_OVERSAMPLING> Oversampling selection
// <usartOVS16=> 16x oversampling
// <usartOVS8=> 8x oversampling
// <usartOVS6=> 6x oversampling
// <usartOVS4=> 4x oversampling
// <i> Default: usartOVS16
#define SL_UARTDRV_USART_VCOM_OVERSAMPLING      usartOVS4
 
// <o SL_UARTDRV_USART_VCOM_MVDIS> Majority vote disable for 16x, 8x and 6x oversampling modes
// <true=> True
// <false=> False
#define SL_UARTDRV_USART_VCOM_MVDIS             false
 
// <o SL_UARTDRV_USART_VCOM_RX_BUFFER_SIZE> Size of the receive operation queue
// <i> Default: 6
#define SL_UARTDRV_USART_VCOM_RX_BUFFER_SIZE  6
 
// <o SL_UARTDRV_USART_VCOM_TX_BUFFER_SIZE> Size of the transmit operation queue
// <i> Default: 6
#define SL_UARTDRV_USART_VCOM_TX_BUFFER_SIZE 6
// </h>
// <<< end of configuration section >>>
 
// <<< sl:start pin_tool >>>
// <usart signal=TX,RX,(CTS),(RTS)> SL_UARTDRV_USART_VCOM
// $[USART_SL_UARTDRV_USART_VCOM]
#define SL_UARTDRV_USART_VCOM_PERIPHERAL         USART0
#define SL_UARTDRV_USART_VCOM_PERIPHERAL_NO      0
 
// USART0 TX on PA0
#define SL_UARTDRV_USART_VCOM_TX_PORT            gpioPortA
#define SL_UARTDRV_USART_VCOM_TX_PIN             0
#define SL_UARTDRV_USART_VCOM_TX_LOC             0
 
// USART0 RX on PA1
#define SL_UARTDRV_USART_VCOM_RX_PORT            gpioPortA
#define SL_UARTDRV_USART_VCOM_RX_PIN             1
#define SL_UARTDRV_USART_VCOM_RX_LOC             0
 
// USART0 CTS on PA2
#define SL_UARTDRV_USART_VCOM_CTS_PORT           gpioPortA
#define SL_UARTDRV_USART_VCOM_CTS_PIN            2
#define SL_UARTDRV_USART_VCOM_CTS_LOC            30
 
// USART0 RTS on PA3
#define SL_UARTDRV_USART_VCOM_RTS_PORT           gpioPortA
#define SL_UARTDRV_USART_VCOM_RTS_PIN            3
#define SL_UARTDRV_USART_VCOM_RTS_LOC            30
 
// [USART_SL_UARTDRV_USART_VCOM]$
// <<< sl:end pin_tool >>>
#endif // SL_UARTDRV_USART_VCOM_CONFIG_H